DOUBLE COLUMN MACHINING CENTER
STANDARD ACCESSORIES
1. FANUC Control Motors
2. 4” Spindle Bore
3. Auto 4 Steps Spindle Speed Change
4. H4 0r V8 Turret
5. Auto Coolant, Hydraulic and Lubrication System
6. Splash Guard
7. Hydraulic Tailstock
8. Work Light
9. Tool Box with Tools
OPTIONS
1. Extra Spindle Bore and Motor
2. Spindle Oil Chiller
3. Hydraulic / Manual Chuck
4. C Axis or Spindle 1/15 Degree Indexing
5. Driving tool Turret
6. Steady Rest
7. Follow Rest
8. Special Boring Bar Holder
9. Higher Coolant Pressure
10. Chip Conveyor
11. CE Mark
12. Transformer
DCM 21/24 Series
| MODEL | Description | DCM 21 Series | DCM 24 Series | ||||
|---|---|---|---|---|---|---|---|
| 2132 | 2142 | 2152 | 2423A | 2424A | 2452A | ||
| TABLE | Length | 3000 mm (118.1") | 4000 mm (157.4") | 5000 mm (196.8") | 3000 mm (118.1") | 4000 mm (157.4") | 5000 mm (196.8") |
| Width | 1800 mm (70.8") | 2000 mm (78.7") | |||||
| Maximum load | 15000 kgs | 18000 kgs | 20000 kgs | 15000 kgs | 18000 kgs | 20000 kgs | |
| TRAVEL | Longitudinal travel (X) | 3200 mm (126") | 4200 mm (165.3") | 5200 mm (204.7") | 3200 mm (126") | 4200 mm (165.3") | 5200 mm (204.7") |
| Cross travel (Y) | 2100 mm (82.6") | 2400 mm (94.5") | |||||
| Vertical travel (Z) | 800 mm (31.5") / 1100 mm (43.3") (OPT.) | ||||||
| Distance from Spindle end to table | 180–980 mm (7" ~ 38.6") |
705–875 mm (2.95" ~ 34.4") |
180–980 mm (5.1"~ 36.6") |
705–875 mm (2.95" ~ 34.4") |
|||
| Distance from Spindle center to column | 430 mm (16.9") | ||||||
| Distance Between columns | 2150 mm (86.4") | 2450 mm (96.5") | |||||
| SPINDLE | Spindle Drive motor (Cont./30 min) | 22 kW / 26 kW | |||||
| Spindle Speed | 6000 rpm | ||||||
| Spindle Taper | BT50 | ||||||
| FEED | Rapid traverse (X/Y/Z) | 18/20/15 | 15/20/15 | 15/20/15 | 12/20/15 | 12/20/15 | 12/20/15 |
| Cutting Feed rate | 18000 mm/min | 15000 mm/min | |||||
| ATC | Tool storage capacity | 24 tools | 24 tools | ||||
| Tool size (full tools) | Dia. 110 mm (4.3") | Dia. 110 mm (4.3") | |||||
| Mac. Tool size (next pocket empty) | Dia. 200 mm (7.8") | Dia. 200 mm (7.8") | |||||
| Max. Tool length | 380 mm (14.9") | 380 mm (14.9") | |||||
| Max. Tool weight | 18 kgs | 18 kgs | |||||
| Tool Shank & pull stud | BT50 | BT50 | |||||
| MISCELLANEOUS | Power requirement | 40–50 kVA | 40–50 kVA | ||||
| Machine size (L) | 8400 mm (331") | 11100 mm (447") | 13100 mm (515.7") | 8400 mm (331") | 11100 mm (447") | 13100 mm (515.7") | |
| Machine size (W) | 4850 mm (191") | 5150 mm (202.8") | |||||
| Machine size (H) | 4570 mm (180") / 5470 mm (215.3") | ||||||
| Weight | 29 ton | 33 ton | 37 ton | 30 ton | 35 ton | 40 ton | |
*THE SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
STANDARD ACCESSORIES
- Fanuc OiMF + 10.4″ LCD
- Spindle oil chiller
- Spindle air blast
- Auto coolant, hydraulic and lubrication system
- Electrical cabinet with heat exchanger
- Gear box
- Arm type 24 tools ATC (DCM-21~24A)
Arm type 32 tools ATC (DCM-28-48) - Auto door for ATC
- Dual spiral type chip remover
- Steel-belt type chip conveyor
- Semi-enclosed splash guard (DCM-21~24A)
- Open type splash guard (DCM-28~48)
- X axis steel telescopic cover
- Y axis JAVARA cover
- Air/water cleaning equipment
- Foot switch for tool away
- Rigid tapping
- RS232 / USB / Ethernet interface
- Work light
- Leveling screw + foundation bolts
- Tool box with tools