PRECISION CNC SLANT BED LATHE
TCY Series
| MODEL | ITEM | UNIT | TC-40YL08 | TC-40YL15 | TC-40YL23 | TC-40YL30 | TC-40YL40 | TC-40YL50 | TC-40YL60 | TC-40YL70 |
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Swing over bed | mm(in) | Ø850 (33.45”) | |||||||
| Swing over cross slide | mm(in) | Ø660 (26.1”) | ||||||||
| Max turning diameter | mm(in) | Ø530 (20.87”) | ||||||||
| Spindle nose between center | mm(in) | 943 (37.13”) | 1703 (67.05”) | 2463 (96.85”) | 3223 (126.89”) | 4223 (166.26”) | 5223 (205.63”) | 6223 (245.12”) | 7223 (284.37”) | |
| Working length | mm(in) | 682 (26.85”) | 1442 (56.77”) | 2202 (86.69”) | 2962 (116.61”) | 3962 (155.98”) | 4962 (195.27”) | 5962 (234.72”) | 6962 (274.09”) | |
| Spindle | Spindle nose | ISO | STD.: A2-8 / OPT.: A2-11 / A2-15 | |||||||
| Spindle bore | mm(in) | STD.: Ø105 (4.13”) / OPT.: A2-11: Ø131 (5.15”), Ø165 (6.5”) / A2-15: Ø180 (7.08”) | ||||||||
| Bar capacity | mm(in) | STD.: Ø89 (3.5”) / OPT.: A2-11: Ø117 (4.6”), Ø142 (5.6”) / A2-15: Ø166 (6.53”) | ||||||||
| Max. spindle speed | rpm | STD.: 2500 / OPT.: 2000, 1650 / 1300 | ||||||||
| Spindle gearbox step | 2 | |||||||||
| Turret | Turret type | VDI 40 | ||||||||
| Tool station | 12 Tools | |||||||||
| O.D. Tooling | mm(in) | 25 (1”) | ||||||||
| I.D. Tooling | mm(in) | 40 (1.5”) | ||||||||
| Living tools speed | rpm | 4000 | ||||||||
| X/Y/Z axis | X axis travel | mm(in) | 265+55 (10.43”+2.17”) | |||||||
| Y axis travel | mm(in) | ±80 (3.15”) | ||||||||
| Z axis travel | mm(in) | 783 (30.83”) | 1543 (60.75”) | 2303 (90.67”) | 3063 (120.59”) | 4063 (159.96”) | 5063 (199.33”) | 6063 (238.7”) | 7063 (278.07”) | |
| Rapid speed (Z axis) | m/min | 12 | ||||||||
| Rapid speed (Y axis) | m/min | 8 | ||||||||
| Rapid speed (Z axis) | m/min | 15 / 15 / 15 / 8 / 8 / 8 | ||||||||
| Cutting feed rate | mm/min | 0.001 – 500 | ||||||||
| Motor | Main Spindle (30 min. Rating) | kW(HP) | 22 (29.5) / 26 (34.9) | |||||||
| X Axis | kW(HP) | 4 (5.3) | ||||||||
| Z Axis | kW(HP) | 4 (5.3) | ||||||||
| Y Axis | kW(HP) | 1.6 (2.15) | ||||||||
| Hydraulic pump | kW(HP) | 2.2 (3) | ||||||||
| Coolant pump | W(HP) | 0.75 (1) | ||||||||
| Tailstock | Type | Programmable | ||||||||
| Tailstock travel | mm(in) | 687 (27.05”) | 1447 (56.97”) | 2207 (86.89”) | 2967 (116.81”) | 3967 (156.18”) | 4967 (195.55”) | 5967 (234.92”) | 6967 (274.29”) | |
| Quill type | STD.: Stable / OPT.: Revolve | |||||||||
| Quill stroke | mm(in) | 100 (3.94”) | ||||||||
| Quill dia. | mm(in) | STD.: Ø110 (4.33”) / OPT.: Ø160 (6.29”) | ||||||||
| Taper of center | MT | No.5 | ||||||||
| Tank capacity | Hydraulic | Litres | 80 | |||||||
| Coolant tank | Litres | 4800 | 580 | 680 | 780 | 910 | 1080 | 1170 | 1350 | |
| Dimension | L*W*H | mm(in) | 3800×2200×2650 | 4500×2200×2650 | 5300×2200×2650 | 6000×2550×3000 | 7000×2550×3000 | 8000×2550×3000 | 9000×2550×3000 | 10375×2550×3000 |
| 149.6”×86.6”×104.3” | 177.2”×86.6”×104.3” | 208.7”×86.6”×104.3” | 236.2”×100.4”×118.11” | 275.6”×100.4”×118.11” | 315”×100.4”×118.11” | 354.3”×100.4”×118.11” | 408.46”×100.4”×118.11” | |||
| NW/GW | kgs | 13000/13450 | 14500/16000 | 16000/17500 | 17500/19500 | 21000/23000 | 24000/25500 | 27100/29000 | 30600/32500 | |
| *Specifications are subject to change without prior notice | ||||||||||
| MODEL | ITEM | UNIT | TC-45YLY12 | TC-45YLY17 | TC-45YL22 | TC-45YL32 | TC-45YL42 | TC-45YL52 | TC-45YL62 | TC-45YL72 |
|---|---|---|---|---|---|---|---|---|---|---|
| Capacity | Swing over bed | mm(in) | Ø1020 (40.16") | |||||||
| Swing over cross slide | mm(in) | Ø890 (35") | ||||||||
| Max turning diameter | mm(in) | Ø720 (28.3") | ||||||||
| Spindle nose between center min. | mm(in) | 1570 (61.81") | 2070 (81.5") | 2570 (101.18") | 3530 (138.98") | 4470 (175.98") | 5470 (215.35") | 6470 (254.72") | 7470 (294.09") | |
| Working length | mm(in) | 980 (38.58") | 1480 (58.27") | 1980 (77.95") | 2940 (115.75") | 3880 (152.76") | 4880 (192.13") | 5880 (231.5") | 6880 (270.87") | |
| Spindle | Spindle nose | ISO | STD.: A2-11 / OPT.: A2-15 | |||||||
| Spindle bore | mm(in) | STD.: Ø160 (6.3") / OPT.: A2-15: Ø230 (9") / A2-20: Ø320 (12.59"), Ø360 (14.17") | ||||||||
| Bar capacity | mm(in) | OPT.: A2-11: Ø156 (6.1"), A2-15: Ø205 (8.07") / A2-20: Dep. On Chuck | ||||||||
| Max. spindle speed | rpm | STD.: 1500 / OPT.: 700, 550, 450 | ||||||||
| Spindle gearbox step | - | 3 | ||||||||
| Turret | Turret type | - | VDI50 | |||||||
| Tool station | - | 12 Tools | ||||||||
| O.D. tooling | mm(in) | 32 (1.25") | ||||||||
| I.D. tooling | mm(in) | Ø60 (2.36") | ||||||||
| Living tools speed | rpm | 4000 | ||||||||
| X/Y/Z axis | X Axis Travel | mm(in) | 360÷50 (14. 1"+ 1.97") | |||||||
| Y axis travel | m/min | ‡130 (5.12") | ||||||||
| Zaxis travel | m/min | 1210 (47.64") | 1710 (67.32") | 2210 (87") | 3170 (124.8") | 4110 (161.81") | 5110 (201.18") | 6110 (240.55") | 7110 (279.92") | |
| Rapid speed (X axis) | m/min | 12 | ||||||||
| Rapid speed (Y axis) | m/min | 8 | ||||||||
| Rapid sceed (Zaxisi | m/min | 15 / 15 / 15 / 10 / 8 / 8 / 8 | ||||||||
| Cutting feed rate | m/min | 0.001 ~ 500 | ||||||||
| Motor | Main spindle (Continuous) | kW(HP) | 30 (40) / 37 (49) | |||||||
| Main spindle (30 min. Rating) | kW(HP) | 30 (40) / 37 (49) | ||||||||
| X axis | kW(HP) | 4 (5.3) | ||||||||
| Y axis | kW(HP) | 4 (5.3) | ||||||||
| Z axis | kW(HP) | 7 (9.4) | ||||||||
| Hydraulic pump | kW(HP) | 1.5 (2) | ||||||||
| Coolant pump | kW(HP) | 0.75 (1) | ||||||||
| Tailstock | Type | - | Programmable | |||||||
| Tailstock travel | mm(in) | 900 (35.43") | 1400 (55.11") | 1900 (74.8") | 2860 (112.6") | 3800 (149.6") | 4800 (188.97") | 5740 (255.98") | 6740 (265.35") | |
| Quill type | - | STD.: Stable / OPT.: Rvolve | ||||||||
| Quill stroke | mm(in) | 160 mm (6.3") | ||||||||
| Quill dia. | mm(in) | Ø160 mm (6.3") | ||||||||
| Taper of center | MT | NO.6 | ||||||||
| Tank capacity | Hydraulic | Litres | 80 | |||||||
| Coolant tank | Litres | 520 | 620 | 720 | 810 | 950 | 1050 | 1150 | 1250 | |
| Dimension | L×W×H | mm | 5440×2250×2760 | 5940×2250×2760 | 6440×2250×3090 | 7440×2570×3090 | 8440×2570×3090 | 9440×2570×3090 | 104402645x3165 | 11440x2720x3240 |
| mm | 214×288×6108 ft. | 233×98.8×6108 ft. | 253.5×98.8×6108 ft. | 292×101.2×121.65 ft. | 323×101.2×121.65 ft. | 371.7x101.2×121.65 | 411×1004.1×124.61 ft. | 371.7×107.1×127.65 ft. | ||
| NW/GW | kgs | 14000/14500 | 15550/16260 | 17090/18600 | 23300/25270 | 26400/28870 | 29500/22470 | 29500/22470 | 32600/28870 | |
| *Specifications are subject to change without prior notice | ||||||||||
| MODEL | ITEM | UNIT | TC-50YL22 | TC-50YL32 | TC-50YL42 | TC-50YL52 | TC-50YL62 | TC-50YL72 |
|---|---|---|---|---|---|---|---|---|
| Capacity | Swing over bed | mm (in) | Ø1100 (43") | |||||
| Swing over cross slide | mm (in) | Ø1000 (39.3") | ||||||
| Max turning diameter | mm (in) | Ø900 (35.4") | ||||||
| Spindle nose between center | mm | 2570 (101.18") | 3530 (138.98") | 4470 (175.98") | 5470 (215.35") | 6470 (254.7") | 7470 (294.1") | |
| Working length | mm | 2078 (81.81") | 3038 (119.60") | 3978 (156.61") | 4978 (195.98") | 5978 (235.35") | 6978 (274.7") | |
| Spindle | Spindle nose | ISO | STD: A2-11 / OPT: A2-15 / A2-20 | |||||
| Spindle bore | mm (in) | STD: Ø160 (6.3") / OPT: A2-15: Ø230 (9") / A2-20: Ø320 (12.59"), Ø360 (14.17") | ||||||
| Bar capacity | mm (in) | OPT: A2-11: Ø142 (5.6"), A2-15: Ø205 (8.07") / A2-20: Dep. On Chuck | ||||||
| Max. spindle speed | rpm | STD: 1500 / OPT: 700, 550, 450 | ||||||
| Spindle gearbox step | - | 4 | ||||||
| Turret | Turret type | - | BMT-75 | |||||
| Tool station | - | 12 Tools | ||||||
| O.D. tooling | mm (in) | 32 (1.25") | ||||||
| I.D. tooling | mm (in) | Ø80 (3.14") | ||||||
| Living tools speed | rpm | 3000 | ||||||
| X/Y/Z Axis | X axis travel | mm (in) | 450 + 50 (17.7" + 1.97") | |||||
| Y axis travel | mm (in) | ±150 (5.9") | ||||||
| Z axis travel | mm (in) | 2210 (87") | 3170 (124.8") | 4110 (161.8") | 5110 (201.18") | 6110 (240.55") | 7110 (279.92") | |
| Rapid speed (X axis) | m/min | 12 | ||||||
| Rapid speed (Y axis) | m/min | 8 | ||||||
| Rapid speed (Z axis) | m/min | 15 / 15 / 15 / 10 / 8 / 8 / 8 | ||||||
| Cutting feed rate | mm/rev | 0.001 ~ 500 | ||||||
| Motor | Main spindle (Continuous) | kW (HP) | 30 (40) / 37 (49) | |||||
| Main spindle (30 min. Rating) | kW (HP) | 30 (40) / 37 (49) | ||||||
| X axis | kW (HP) | 7 (9.4) | ||||||
| Y axis | kW (HP) | 4 (5.3) | ||||||
| Z axis | kW (HP) | 7 (9.4) | ||||||
| Hydraulic pump | kW (HP) | 3.75 (5) | ||||||
| Coolant pump | kW (1) | 0.75 (1) | ||||||
| Tailstock | Type | - | Programmable | |||||
| Tailstock travel | mm (in) | 1900 (74.8") | 2860 (112.6") | 3800 (149.6") | 4800 (188.97") | 5900 (228.35") | 6900 (267.72") | |
| Quill type | - | STD: Stable / OPT: Rvolve | ||||||
| Quill stroke | mm (in) | 200 mm (7.87") | ||||||
| Quill dia. | mm (in) | Ø120 mm (7.87") | ||||||
| Taper of center | - | MT NO.6 | ||||||
| Tank Capacity | Hydraulic tank | Litres | 80 | |||||
| Coolant tank | Litres | 670 | 810 | 950 | 1050 | 1150 | 1250 | |
| Dimension | L x W x H | mm | 7800×3300×3400 | 8800×3300×3400 | 9800×3300×3400 | 10800×3300×3400 | 11800×3300×3400 | 12800×3300×3400 |
| kg | 18500 | 20500 | 22500 | 24500 | 26500 | 28500 | ||
| Gross weight | kg | 20000 | 22000 | 24000 | 26000 | 28000 | 30000 | |
| *Specifications are subject to change without prior notice | ||||||||
STANDARD ACCESSORIES
- Spindle oil cooler (TC-45/50)
- 2-stages speed gearbox (TC-35/ 40)
- Three stages speed gear head (TC-45)
- Four stages speed gear head (TC-50)
- Servo turret + 12 stations direct type turret disc
- Manual tailstock + Stable quill + living center (TC-35)
- Programmable tailstoc k+ Stable quill + living center (TC-40/45/50)
- Working lamp
- Heat exchanger of electric box cabinet
- 6 bar coolant pump
- Lubrication system
- Chip conveyor and bucket
- Three color alarm light
- Tool box and tool kits
Optional Accessories
- Larger spindle
- Transformer
- Programmable tailstock + stable quill + living center (TC-35)
- Programmable tailstock + Rotary quill + stable center
(TC-35/40/45/50) - Automatic tool setter
- Cs /Cf axis + power turret
- Larger hydraulic chuck
- 60″ height chip conveyor and bucket
- TS / CE / CSA / UKCA electric control
- Air conditioner for electrical cabinet
- Larger spindle motor
- High pressure coolant pump
- Oil mist collector
- Oil skimmer
- Manual / Hydraulic steady rest
- Sub spindle
STANDARD ACCESSORIES
1. FANUC Control Motors
2. 4” Spindle Bore
3. Auto 4 Steps Spindle Speed Change
4. H4 0r V8 Turret
5. Auto Coolant, Hydraulic and Lubrication System
6. Splash Guard
7. Hydraulic Tailstock
8. Work Light
9. Tool Box with Tools
OPTIONS
1. Extra Spindle Bore and Motor
2. Spindle Oil Chiller
3. Hydraulic / Manual Chuck
4. C Axis or Spindle 1/15 Degree Indexing
5. Driving tool Turret
6. Steady Rest
7. Follow Rest
8. Special Boring Bar Holder
9. Higher Coolant Pressure
10. Chip Conveyor
11. CE Mark
12. Transformer